 |
Wireless Charging Power Inductor Coil / Copper Induction Coil DD46.5*51.5*0.8 Core
Product Details:
| Place of Origin: | Made in Dongguan |
| Brand Name: | uchi |
| Certification: | UL ROH |
| Model Number: | PCW-465108-7R0K2 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 10000 |
|---|---|
| Price: | USD |
| Packaging Details: | box( L350*W350*H170) |
| Payment Terms: | Western Union, MoneyGram, T/T |
| Supply Ability: | 10000000 |
|
Detail Information |
|||
| Core: | DD46.5*51.5*0.8 | Wire: | 0.08*105P*9.5TS |
|---|---|---|---|
| Sn: | Sn99.3% | Cu: | 0.7% |
| Temp: | 25degree | Humidity: | 70% |
| Highlight: | wireless charging receiver coil,wireless power charging coil |
||
Product Description
Notching L wireless charging coils assembly PCW-465108-7R0K2 for smart tv or phone charger and notebook
1.DIMENSIONS(MM)
| A(mm) | 52.0+/-1.5 |
| B (mm) | 48.0+/-1.5 |
| C(mm) | 4.0Ref |
| C1(mm) | 20+/-1.5 |
| D(mm) | 26.5+/-1.5 |
| E(mm) | 17.5+/-1.0 |
| F(mm) | 0.5REF |
| G(mm) | 12.0+/-2.0 |
| H(mm) | 4.8Max |
| W(mm) | 93.5+/-1.5 |
2.MATERIAL:
a. CORE:DD46.5*51.5*0.8
b.WIRE:∮0.08*105P*9.5TS
The inner diameter:26*17.5(MM)
c.Sn:Sn99.3% Cu:0.7%
d.Yellow adhesive:1603
e.tape maroon mylar tape (8.0mm width)
f.The back glue:PE93*51.5
3.ELECTRICAL DIAGRAM:
4. ELECTRICAL CHAR ACTERISTIC:
| ITEM | SPEC | TEST EQUIPMENT | TEST CONDITION |
| L1-2=L3-4 | 7.0uH+10% | WK5237 OR EQU | 100KHz/1.0V |
| DCR1-2=DCR3-4 | 75(mΩ)MAX | 502BC | |
| Q Value) | 60 Min | WK5237 OR EQU | 100KHz/1.0 |
5.SPECIFICATION NO:
|
PCW 465108 -7R0 K2 |
6.TEST DATA:
| ELECTRICAL CHARACTERISTIC | |||||
| L1-2 uH | L3-4 uH | DCR1-2(mΩ) | DCR3-4(mΩ) | Q | |
| 7.0+/-10% | 7.0+/-10% | 75MAX | 75MAX | 60Min | |
| 6.88 | 7.02 | 36.2 | 34.9 | 86.3 | |
| 6.79 | 6.98 | 36.1 | 34.7 | 85.9 | |
| 6.68 | 6.84 | 35.6 | 34.5 | 84.9 | |
| 6.79 | 6.90 | 36.0 | 33.9 | 88.4 | |
| 6.58 | 6.81 | 37.0 | 34.2 | 85.1 | |
| 6.744 | 6.91 | 36.18 | 34.44 | 86.12 | |
| 0.3 | 0.08 | 1.4 | 1.0 | 3.5 | |
7.PACKAGING
a.quantity
b.packaing dimensions(mm)
| L | W | H |
| 350MAX | 350MAX | 170MAX |
Please be sure to the parts at 35℃or less,70%RH or less,and isolate the parts from sulphic and chloric atm osphere
8.RELIABILITY TEST
|
.1.STORAGE TEMPERATURE:
|
-40℃～85℃ |
|
.2.OPERATING TEMPERATURE RANGE :
|
-40℃～+85℃(CONTAIN HEATING COIL) -40℃～+85℃ |
|
3.EXTERNAL APPEARANCE :
|
NO EXTERNAL DEFECTS CAN BE FOUND IN THE VISUAL INSPECTION. |
|
4. TERMINAL STRENGTH : |
FIXED INDUCTORS,ONE END OF THE ELECTRODE WITH 0.45KG PULLING FORCE,GUIDED THE NEEDLE DOES NOT FALL OFF.
|
|
5.INSULATING RESISTANCE :
|
THE INSULATION RESISTANCE SHOULD BE OVER 1000MΩ WHEN D.C.100V IS APPLIED TO THE WINDING –CORE. MEANWHILE NO STRUCTURE AND ELECTRIC DEFECTS SHOULD BE FOUND FOR 1 MINUTE.
|
|
6. HUMIDITY TEST :
|
INDUCTANCE DEVIATION IS WITHIN ±10.0% AND NO STRUCTURE AND ELECTRIC DEFECTS CAN BE FOUND AFTER 96±2hours TEST UNDER THE CONDITIONOF RELATIVE HUMIDITY OF 90～95% AND TEMPERATURE OF 40±5℃. AND 1 HOUR STORAGE UNDER ROOM AMBIENT CONDITIONS AFTER THE DEVICE IS WIPED WITH DRY CLOTH.
|
|
7. VIBRATION TEST :
|
INDUCTANCE DEVIATION IS WITHIN ±10.0％ AFTER 1 HOUR SWEEPING VIBRATION IN EACH THREE DIRECTIONS. NAMELY, FREQUENCY IS10～55Hz ANDTHE AMPLITUDE OF 1MINUTE CYCLE IS 1.5mm .
|
9.Background
Inductive Coupling: good coupling between two coils, a transmitter coil and a receiver coil. An alternating current in the transmitter coil generates a magnetic field which induces a voltage in the receiver coil. This voltage can be used to power a mobile device or charge a battery. It is ideal for wireless charging transmitter coil assembly and increase the charging efficiency.
10.Features
Wireless charging transmitter coil assembly (Tx - coil)
Litz wire winding Shield by Ni-Zn ferrite material
Compliance with Qi standard of WPC
11.Applications
Mobile Phones
Battery or battery Chargers
Cameras
MP3 /PMP
MID's
Hand Held Devices
Gaming devices