 |
0.08*105P*10.5TS Wireless Charging Receiver Card Coil PCW-50R21-A1109803
Product Details:
| Place of Origin: | Made in Dongguan |
| Brand Name: | uchi |
| Certification: | UL ROH |
| Model Number: | PCW-50R21-A1109803 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 10000 |
|---|---|
| Price: | USD |
| Packaging Details: | box( L350*W350*H170) |
| Payment Terms: | Western Union, MoneyGram, T/T |
| Supply Ability: | 10000000 |
|
Detail Information |
|||
| Core: | BP95TG50*0.3 Without A Round Hole | Wire: | 0.08*105P*10.5TS |
|---|---|---|---|
| Sn: | Sn99.3% | Cu: | 0.7% |
| Temp: | 25degree | Humidity: | 70% |
| High Light: | wireless charging receiver coil,wireless charging transmitter coil |
||
Product Description
Notching L wireless charging coils assembly PCW-50R21-A1109803 for smart tv or phone charger and notebook
1.DIMENSIONS(MM)
| A(mm) | 49.0+/-1.0 |
| B (mm) | 43.5+/-1.0 |
| C(mm) | 20.5+/-0.5 |
| D(mm) | 40+/-3.0 |
| E(mm) | 6.0Ref |
| F(mm) | 3.0+/-1.5 |
| G(mm) | 2.1Max |
2.MATERIAL:
a. CORE:BP95TG50*0.3 Without a round hole
b.WIRE:∮0.08*105P*10.5TS
c.Sn:Sn99.3% Cu:0.7%
d.doulb faced adhesive tape:.&43*43MM 9448A 3M
&40*22MM 9448A*3M
e.tape maroon mylar tape (5.0mm width)
3.ELECTRICAL DIAGRAM:
4. ELECTRICAL CHAR ACTERISTIC:
| ITEM | SPEC | TEST EQUIPMENT | TEST CONDITION |
| L | 6.3uH+10% | WK5237 OR EQU | 100KHz/1.0V |
| DCR | 50(mΩ)MAX | 502BC | |
| Q Value) | 60 Min | WK5237 OR EQU | 100KHz/1.0 |
5.SPECIFICATION NO:
|
PCW 50R21 A1109803 K |
6.TEST DATA:
| ITEM | L(μH) | DCR(mΩ) | Q | |
| SPEC | 6.3+/-10% | 50MAX | 60 Min | |
| 1 | 6.29 | 37.7 | 80 | |
| 2 | 6.31 | 37.9 | 87 | |
| 3 | 6.28 | 37.6 | 82 | |
| 4 | 6.30 | 37.8 | 85 | |
| 5 | 6.31 | 37.5 | 86 | |
| 6 | ||||
| 7 | ||||
| 8 | ||||
| 9 | ||||
| 10 | ||||
|
X |
6.298 | 37.7 | 84 | |
| R | 0.03 | 0.4 | 5 |
7.PACKAGING
a.quantity
b.packaing dimensions(mm)
| L | W | H |
| 350MAX | 350MAX | 170MAX |
Please be sure to the parts at 35℃or less,70%RH or less,and isolate the parts from sulphic and chloric atm osphere
8.RELIABILITY TEST
|
.1.STORAGE TEMPERATURE:
|
-40℃～85℃ |
|
.2.OPERATING TEMPERATURE RANGE :
|
-40℃～+85℃(CONTAIN HEATING COIL) -40℃～+85℃ |
|
3.EXTERNAL APPEARANCE :
|
NO EXTERNAL DEFECTS CAN BE FOUND IN THE VISUAL INSPECTION. |
|
4. TERMINAL STRENGTH : |
FIXED INDUCTORS,ONE END OF THE ELECTRODE WITH 0.45KG PULLING FORCE,GUIDED THE NEEDLE DOES NOT FALL OFF.
|
|
5.INSULATING RESISTANCE :
|
THE INSULATION RESISTANCE SHOULD BE OVER 1000MΩ WHEN D.C.100V IS APPLIED TO THE WINDING –CORE. MEANWHILE NO STRUCTURE AND ELECTRIC DEFECTS SHOULD BE FOUND FOR 1 MINUTE.
|
|
6. HUMIDITY TEST :
|
INDUCTANCE DEVIATION IS WITHIN ±10.0% AND NO STRUCTURE AND ELECTRIC DEFECTS CAN BE FOUND AFTER 96±2hours TEST UNDER THE CONDITIONOF RELATIVE HUMIDITY OF 90～95% AND TEMPERATURE OF 40±5℃. AND 1 HOUR STORAGE UNDER ROOM AMBIENT CONDITIONS AFTER THE DEVICE IS WIPED WITH DRY CLOTH.
|
|
7. VIBRATION TEST :
|
INDUCTANCE DEVIATION IS WITHIN ±10.0％ AFTER 1 HOUR SWEEPING VIBRATION IN EACH THREE DIRECTIONS. NAMELY, FREQUENCY IS10～55Hz ANDTHE AMPLITUDE OF 1MINUTE CYCLE IS 1.5mm .
|
9.Background
Inductive Coupling: good coupling between two coils, a transmitter coil and a receiver coil. An alternating current in the transmitter coil generates a magnetic field which induces a voltage in the receiver coil. This voltage can be used to power a mobile device or charge a battery. It is ideal for wireless charging transmitter coil assembly and increase the charging efficiency.
10.Features
Wireless charging transmitter coil assembly (Tx - coil)
Litz wire winding Shield by Ni-Zn ferrite material
Compliance with Qi standard of WPC
11.Applications
Mobile Phones
Battery or battery Chargers
Cameras
MP3 /PMP
MID's
Hand Held Devices
Gaming devices