 |
Notching L Wireless Charging Receiver Coil For Smart Tv Or Phone And Notebook WX4710-7R0K95L
Product Details:
| Place of Origin: | Made in Dongguan |
| Brand Name: | uchi |
| Certification: | UL ROH |
| Model Number: | WX4710-7R0K95L |
Payment & Shipping Terms:
| Minimum Order Quantity: | 10000 |
|---|---|
| Price: | USD |
| Packaging Details: | box( L350*W350*H170) |
| Payment Terms: | Western Union, MoneyGram, T/T |
| Supply Ability: | 10000000 |
|
Detail Information |
|||
| Core: | G47*1.0 | Wire: | 0.08*105P*10.5TS |
|---|---|---|---|
| Sn: | Sn99.3% | Cu: | 0.7% |
| Temp: | 25degree | Humidity: | 70% |
| High Light: | wireless power charging coil,wireless charging transmitter coil |
||
Product Description
Notching L wireless charging coils assembly WX4710-7R0K95L for smart tv or phone and notebook
1. DIMENSIONS(MM)
| A(mm) | 47.4Max |
| B (mm) | 23.5+/-0.5 |
| C(mm) | 2.0～4.0 |
| C1(mm) | 95+/-5.0 |
| E(mm) | 8.0Ref |
| F(mm) | 2.7Max |
| H(mm) | 48+/-1.5 |
| E(mm) | 8.0Ref |
2.MATERIAL:
a. CORE:G47*1.0 notching "L"
b. WIRE:∮0.08*105P*12.5TS
c. Sn:Sn99.3% Cu:0.7%
d. Yellow adhesive:1603
e. tape maroon mylar tape (8.0mm width)
3.ELECTRICAL DIAGRAM:
4. ELECTRICAL CHAR ACTERISTIC:
| ITEM | SPEC | TEST EQUIPMENT | TEST CONDITION |
| L | 7.0uH+10% | WK5237 OR EQU | 100KHz/0.25V |
| DCR | 60(mΩ)MAX | 502BC | |
| Q Value) | 70 Min | WK5237 OR EQU | 100KHz/0.25V |
5.SPECIFICATION NO:
|
WX 4710 -7R0 K 95L |
6.TEST DATA:
| ELECTRICAL CHARACTERISTIC | ||||
| ITEM | L(μH) | DCR(mΩ) | Q | |
| SPEC | 7.0+/-10% | 60MAX | 50 Min | |
| 1 | 7.05 | 46.2 | 82 | |
| 2 | 7.15 | 46.1 | 75 | |
| 3 | 6.98 | 45.6 | 71 | |
| 4 | 7.01 | 46 | 77 | |
| 5 | 7.05 | 47 | 70 | |
| X | 7.048 | 46.18 | 75 | |
| R | 0.17 | 1.4 | 7.0 | |
7.PACKAGING
a.quantity
b.packaing dimensions(mm)
| L | W | H |
| 350MAX | 350MAX | 170MAX |
Please be sure to the parts at 35℃or less,70%RH or less,and isolate the parts from sulphic and chloric atm osphere
8.RELIABILITY TEST
|
.1.STORAGE TEMPERATURE:
|
-40℃～85℃ |
|
.2.OPERATING TEMPERATURE RANGE :
|
-40℃～+85℃(CONTAIN HEATING COIL) -40℃～+85℃ |
|
3.EXTERNAL APPEARANCE :
|
NO EXTERNAL DEFECTS CAN BE FOUND IN THE VISUAL INSPECTION. |
|
4. TERMINAL STRENGTH : |
FIXED INDUCTORS,ONE END OF THE ELECTRODE WITH 0.45KG PULLING FORCE,GUIDED THE NEEDLE DOES NOT FALL OFF.
|
|
5.INSULATING RESISTANCE :
|
THE INSULATION RESISTANCE SHOULD BE OVER 1000MΩ WHEN D.C.100V IS APPLIED TO THE WINDING –CORE. MEANWHILE NO STRUCTURE AND ELECTRIC DEFECTS SHOULD BE FOUND FOR 1 MINUTE.
|
|
6. HUMIDITY TEST :
|
INDUCTANCE DEVIATION IS WITHIN ±10.0% AND NO STRUCTURE AND ELECTRIC DEFECTS CAN BE FOUND AFTER 96±2hours TEST UNDER THE CONDITIONOF RELATIVE HUMIDITY OF 90～95% AND TEMPERATURE OF 40±5℃. AND 1 HOUR STORAGE UNDER ROOM AMBIENT CONDITIONS AFTER THE DEVICE IS WIPED WITH DRY CLOTH.
|
|
7. VIBRATION TEST :
|
INDUCTANCE DEVIATION IS WITHIN ±10.0％ AFTER 1 HOUR SWEEPING VIBRATION IN EACH THREE DIRECTIONS. NAMELY, FREQUENCY IS10～55Hz ANDTHE AMPLITUDE OF 1MINUTE CYCLE IS 1.5mm .
|
9.Background
Inductive Coupling: good coupling between two coils, a transmitter coil and a receiver coil. An alternating current in the transmitter coil generates a magnetic field which induces a voltage in the receiver coil. This voltage can be used to power a mobile device or charge a battery. It is ideal for wireless charging transmitter coil assembly and increase the charging efficiency.
10.Features
Wireless charging transmitter coil assembly (Tx - coil)
Litz wire winding Shield by Ni-Zn ferrite material
Compliance with Qi standard of WPC
11.Applications
Mobile Phones
Battery or battery Chargers
Cameras
MP3 /PMP
MID's
Hand Held Devices
Gaming devices