10KA Surge Protector Components Used In Common Mode Surge Protection
|Place of Origin:
|CE / SGS / ISO9001
|Surge Protection Device parts
Payment & Shipping Terms:
|Minimum Order Quantity:
|Negotiate / Export package
|8 - 15 days after payment
|T/T, L/C, Western Union
|50000 pieces per month
|Full Set Of Accessories
|Degree Of Protection:
|CE / ROHS / ISO9001
10KA common mode surge protection,
10KA Surge Protector Components,
4P Surge Protector Components
Have Ce / ROHS / ISO9001 Certificate Pole Number 4P Surge Protector Components
Mainly used in common mode protection, but also often used for differential mode protection in passive circuits.
Pressure limiting element
Mainly used in differential mode protection, it is also commonly used in common mode circuits in series with switching elements to prevent short circuit between the line and ground after the switching elements are turned on; or as a current limiting element of the switching element to block freewheeling and reset the switching element .
Anti-overcurrent and overheating protection components
The anti-overcurrent components have self-recovery fuses, current fuses, and resistors, and the anti-overheat protection and overheat detection components have temperature fuse and temperature fuse. A resettable fuse is a positive temperature coefficient thermistor. When the current flowing through it is less than its holding current (low temperature), its resistance is very small; when the current flowing through it exceeds its trigger current (temperature Increase), its resistance value increases sharply, thereby blocking the continuous intrusion of lightning current or the freewheeling of the circuit, and it can recover by itself after the temperature drops. However, due to thermal inertia, the reaction speed is very slow, generally in seconds (the greater the current or the higher the temperature, the faster the reaction). Self-recovery fuses can be used to replace current fuses, eliminating the trouble of frequent replacement. Thermal fuse and thermal fuse are a kind of temperature switch components, which are short-circuited during normal operation. When the temperature is higher than the disconnection temperature, the switch will be disconnected (unrecoverable). They are often used for overheating protection and overheating detection.
Using international brand nylon material and international brand PBT material, the bending strength is in accordance with GB/T9341-2008, and the impact strength of the simply supported beam is notched and unnotched. Comply with GB/T1043.1-2008, flame retardancy complies with GB/T2408-2008, excellent electrical insulation performance, and strong consistency of product surface technology.
It is made of high-precision copper, and the screws and locking sleeves are electroplated after heat treatment. The advantage is that the product is not easy to slip, the salt spray test can reach 72 hours, and the plugging force is moderate.
1. It is recommended that the maximum flow of SPD Imax: 10-60KA.
2. It is recommended that SPD be used in an environment of -40℃ to +100℃.
3. 1P, 2P, 3P, 4P can be distributed according to demand to meet various needs.
4.35mm guide rail design is convenient for subsequent installation.
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, Customized logo and design on mass production are available.
Q:What is the delivery time?
A: 3 days for samples, 7-15 days for mass production.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc
Q: Can I trust you?
A: Absolutely YES, We are “Alibaba” verified supplier for many years.
Q: May I visit your factory?
A:Sure, welcome any time. We can also pick you up at airport or station.
A full set of lightning protection device accessories, welcome to customize