Type 1 And Type 2 Surge Protection 4p Poles For Power Transfer Equipment
|Place of Origin:||Dongguan China|
|Certification:||CE / SGS / ISO9001|
Payment & Shipping Terms:
|Minimum Order Quantity:||200 piece|
|Packaging Details:||export package / Negotiate|
|Delivery Time:||5-15 days after payment|
|Payment Terms:||T/T, L/C, Western Union|
|Supply Ability:||60000 pieces per month|
|Name:||Class I+II Surge Arrester||Material:||MOV/Nylon/PBT|
|Poles Number:||4P||Maximm Continuous Operating Voltage:||255V|
|CertificationCE,CQC:||CE / CQC / SGS||Application:||Power Supply|
4p Poles surge protection equipment,
Umax 255V type 1 and type 2 surge protection,
4p Poles type 1 and type 2 surge protection
Class I+II / Type 1+2 Surge Protection For Power transfer equipment
*DC surge protector is an electrical component used to limit transient over-voltage phenomenon. Because it needs to operate for a long time, there will be aging. If the DC surge protector is used for a long time, the aging caused by it will not be timely. If the facility is updated, it may cause performance degradation, failure and other malfunctions. Therefore, the DC surge protector needs to be inspected regularly. If the inspection result shows aging or the status indicator is invalid, please replace the DC surge protector in time.
Class I+II surge arrester, OBV10-I-25 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions.The voltage-limiting,high-performance spark gaps provide several benefits.A short response time, a low protection level and high current leakage capability with long service life.
|Maximum continuous operating voltage||Uc||V||255/275/320/385|
|SPD to EN 61643-11||Type 1+2|
|SPD to IEC 61643-1||class I+2|
|Lightning impulse current (10/350μs)||Iimp||kA||25|
|Lightning impulse current (10/350μs) [total]||kA||100|
|Nominal discharge surge current (8/20μs)||In||kA||25|
|Arrester surge current (8/20μs) [total]||kA||100|
|Voltage protection level||Up||kV||2,0|
|Follow current quenching capacity Ipeak||Ifi peak||kA||25|
|Maximum back-up fuse||A||315|
|Protection rating||IP 20|
|Connection cross-section, rigid||mm²||10-50|
|Connection cross-section, multi-wire||mm²||10-35|
|Connection cross-section, flexible||mm²||10-25|
1,Protect electric system and on-loading electrical apparatus from thunder and instantaneous over-voltage.
2,Protect transmission of Ethernet signals with 48V DC / 34V AC power supply circuits against
lightning induced surges.
3,Enhanced surge protection.
4,For mounting on 35mm DIN rails acc. to EN 60715.
5,It can effectively ensure the equipments work properly.
·Easy installation or retrofit.
·Fail-safe /self-protected designRemote indicator (optional) with 3pin NO/NC contact.
·IP20 finger-safe designVisual indicator.
·Small foot print.
●Motor controls systems
●Power transfer equipment
● AC drives
Technology SPD parameter(Note:According to user requirement ,can be customized Uc=140V,440V,550V,voltage range of range of the SPD):
|Type No.||Rated Voltage(V) Un||Continuous Voltage Uc(V~)||Standard Discharge Current In(KA)||
Max Discharge Current
|Protection Level(KA~)||Response Time(ns)|
First of all, you must determine what your power distribution system is like, whether it is TT, TN or IT system. After determining the power distribution system, you can choose the protection mode and wiring method of the lightning arrester to select the appropriate lightning arrester.
For example, TN-C uses 3P lightning protection device, TN-S uses 4P, TT uses 3P+N, etc.
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, Customized logo and design on mass production are available.
Q:What is the delivery time?
A: 3 days for samples, 7-15 days for mass production.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc.